Ps3 Gamepad Trigger Problem, wont start at 0 :( Options

[Guest_Paysen_*]

Hi all,

after hours the triggers are now working, but not as i want them to do. They are standing at "128" and not at "0".

When I try to accelerate, it only accelerates 50%



Here is my configuration:



[Options]
UseAutoPad=0 #use 0 to 1; automatically make other PAD to PAD1 after detecting movement
UseInitBeep=1 #use 0 to 1; default 1; beep on init

#Motioninjoy DualShock 3 / Generic Rumble Controller
[PAD1]
Index=0 #controller index in game controllers list; 0 is first; -1 to ignore this pad
Left Analog X=1 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Left Analog Y=-2 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Right Analog X=3 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Right Analog Y=-6 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Left Analog X Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Left Analog Y Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Right Analog X Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Right Analog Y Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Left Analog X+ Button=0 #button id; 0 to disable
Left Analog X- Button=0 #button id; 0 to disable
Left Analog Y+ Button=0 #button id; 0 to disable
Left Analog Y- Button=0 #button id; 0 to disable
Right Analog X+ Button=0 #button id; 0 to disable
Right Analog X- Button=0 #button id; 0 to disable
Right Analog Y+ Button=0 #button id; 0 to disable
Right Analog Y- Button=0 #button id; 0 to disable
D-pad POV=1 #POV index; 0 to disable
D-pad Up=0 #button id; 0 to disable
D-pad Down=0 #button id; 0 to disable
D-pad Left=0 #button id; 0 to disable
D-pad Right=0 #button id; 0 to disable
A=3 #button id; 0 to disable
B=2 #button id; 0 to disable
X=4 #button id; 0 to disable
Y=1 #button id; 0 to disable
Left Shoulder=7 #button id; 0 to disable
Right Shoulder=8 #button id; 0 to disable
Back=9 #button id; 0 to disable
Start=12 #button id; 0 to disable6
Left Thumb=10 #button id; 0 to disable
Right Thumb=11 #button id; 0 to disable
TriggerDeadzone=0 #use 0 to 256; default 0; add deadzone to trigger
Left Trigger=s1 #button id; precede with 'a' for an axis; eg; a-6; for a slider precede with 's' eg; s-1
Right Trigger=s2 #button id; precede with 'a' for an axis; eg; a-6; for a slider precede with 's' eg; s-1
UseForceFeedback=1 #use 0 to 1; default 0
ForceLargeGain=8500 #use 0 to 10000; default 10000; effect intensity
ForceLargePeriod=120000 #use 0 to 200000; default 120000; effect frequency; wheel only
ForceLargeFadeTime=10 #use 0 to 100; default 10
ForceLargeFadeIn=0 #use 0 to 1; default 1
ForceLargeFadeOut=0 #use 0 to 1; default 1
ForceLargeStartMag=3750 #use 0 to 10000; default 2000; effect will begin with this value
ForceSmallGain=8500 #use 0 to 10000; default 10000; effect intensity
ForceSmallPeriod=30000 #use 0 to 200000; default 30000; effect frequency; wheel only
ForceSmallFadeTime=10 #use 0 to 100 default 10
ForceSmallFadeIn=0 #use 0 to 1; default 1
ForceSmallFadeOut=0 #use 0 to 1; default 1
ForceSmallStartMag=2000 #use 0 to 10000; default 2000; effect will begin with this value
WheelInertiaGain=2500 #use 0 to 10000; default 2500; effect intensity; wheel only
WheelSpringGain=5000 #use 0 to 10000; default 5000; effect intensity; wheel only
SteeringWheel=0 #use 0 to 1; enable for all wheel effects

[Guest_Guest_*]

I just calibrated it in Windows, but after calibrating the right Analog stick wont work properly.

Is there a way to just calibrate the sliders in windows?

[virus]

I just calibrated it in Windows, but after calibrating the right Analog stick wont work properly.

Is there a way to just calibrate the sliders in windows?

Your are using old version of x360ce, and for PS3 controller (DS3 or SIXAXIS) you can use Motionin Joy 0.4/0.5 driver that have xinput support on driver level, no emulation needed.